Kenwood DDX-512 - DVD Player With LCD monitor, Руководство по обслуживанию, Страница: 18 / 86

18
DDX5022/5022Y/5032/5032M/512/52RY
DNX5120/512EX/5220/5220BT
TEST MODE
3.4 Serial No. Entry screen
Enter the serial code of each set from this screen.
The Serial No. Entry screen is shown in Figure 3.4.
Clear Cancel
Clear Cancel Enter
1 2 3
4 5 6
7 8 9
0
– – – – – – – –
Serial Number Input
Serial Number Input
∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗
E
Figure 3.4 Serial No. Entry screen
Key Speci fi cation
0~9 : 10key used to enter the serial No.
Clear : Clear the serial No. being input.
Cancel : Transfer to Service screen
Enter : Start entering the serial No.
(When the entry is successfully completed, the
“Write OK” is shown. When the entry is not suc-
cessfully completed, the “Write NG” is shown)
When the “Write OK” is shown, use this key to
transfer to the Service screen.
If the “Write NG” is shown, transfer to the Test
mode again and repeat the entry from the first
step.
3.5 DVD Service Information screen
This screen is to show DVS-8000 service information. This
screen is also used to transfer to DVS-8000 Adjustment
screen.
The DVD Service screen is shown in Figure 3.5.
Next Return Return
DVS-8000 Service Information DVS-8000 Service Information
E
DVS-8000 Adjust
∗∗∗∗∗∗∗∗∗∗
∗∗∗∗∗∗∗∗∗∗
∗∗∗∗∗∗∗∗∗∗
∗∗∗∗∗∗∗∗∗∗
∗∗∗∗∗∗∗∗∗∗
∗∗∗∗∗∗∗∗∗∗
∗∗∗∗∗∗∗∗∗∗
∗∗∗∗∗∗∗∗∗∗
∗∗∗∗∗∗∗∗∗∗
∗∗∗∗∗∗∗∗∗∗
∗∗∗∗∗∗∗∗∗∗
∗∗∗∗∗∗∗∗∗∗
∗∗∗∗∗∗∗∗∗∗
∗∗∗∗∗∗∗∗∗∗
∗∗∗∗∗∗∗∗∗∗
∗∗∗∗∗∗∗∗∗∗
∗∗∗∗∗∗∗∗∗∗
Figure 3.5 DVD Service Information screen
Key Speci fi cation
DVS-8000 Adjust : Transfer to DVS-8000 Adjustment screen
Next
: Transfer to next DVS-8000 Service In-
formation screen.
Return : Transfer to Test Mode Main screen
3.5.1 DVS-8000 Adjustment screen
This is to display DVS-8000 Servo Adjustment screen.
Refer to the Mechanism Speci
fi cation for the detail setup.
Return
DVS-8000 Adjust
:
Offset Cancel
@
Inner Limit
.
Focus Height
DVS-8000 Adjust DVS-8000 Adjust
Cancel Return
Adjust Start
Adjust OK/NG
E E
Figure 3.5.1 DVS-8000 Adjustment screen
Key Speci fi cation
Offset Cancel : Adjust the offset cancel.
Inner Limit
: Adjustment of inner circumference limit
Focus Height : Adjustment of focus height
Adjust Start : Start of adjustment
Return (the First screen) : Transfer to Test Mode Main
screen.
Cancel/Return : Transfer to DVS-8000 Adjust screen (Ini-
tial screen).
3.6 Tuner Mute Level screen
Adjust the Mute Level stored in the E2PROM of the Tuner F/E.
The Tuner Mute Level Setup screen is shown in Figure 3.6.
■
Write Cancel Return
Tuner Mute Level
Tuner Mute Level
E
DW UP
∗∗∗∗
Wite OK/NG
Figure 3.6 Tuner Mute Level Setting screen
Key Speci fi cation
UP : Mute Level Up
DW : Mute Level Down
■
Write : Press and hold (for 1 seconds or longer) to make
the entry in the E2PROM.
Return : Transfer to Service screen.
∗ Adjust the Tuner Mute Level under the following condi-
tions. Under the other conditions than the followings, the
Tuner Mute Level cannot be adjusted if the Tuner Mute
Level Setup screen is shown.
The frequency shall have to be set before transferring to
the Setup screen.
Audio Source : Tuner
LOUD
: OFF
Volume : Step30