Recording s t a r t frame
(ATIME frame specified by P. STOP)
Subcode frame
MUTING
OFF
(Remark) When the power i s f i r s t turned ON, Ni ~ N
8
values are a l l set
to 0.
[ E 7 ] Command
The E7Sxx command can be used to set up and then s t a r t subcode sending.
[ E 7 S 1 0 ] Setup Command for Sending of PCA WRITING subcode.
(Function) Command for ORANGE BOOK PART I I
Sends subcode when PCA WRITING should take place.
(Command format) E7S10!/
[ E 7 S 1 1 ] Setup Command for Sending of PMA WRITING subcode.
(Function) Command for ORANGE BOOK PART I I
Sends subcode when PMA WRITING should take place.
(Command format) E7S11!/
[ E 7 S 1 2 ] Setup Command for Sending of LEAD-OUT WRITING subcode.
(Function) Command for ORANGE BOOK PART I I
Sends subcode when LEAD-OUT WRITING should take place.
(Command format) E7S12!/
[ E 7 S 1 3 ] Setup Command for Sending of LEAD-IN WRITING subcode.
(Function) Command for ORANGE BOOK PART I I
Sends subcode when LEAD-IN WRITING should take place.
(Command format) E7S13!/
1 9
X+l frame
