[ E 6 S 1 0 ] START TIME OF LEAD-IN Setting
(Function) Command for ORANGE BOOK PART I I
Set the START TIME OF LEAD-IN of the SPECIAL FUNCTION read from
the disc.
(Command format) E 6
S
1 0 !
M I O M I S I O S I F I
0
F I $ /
(Mio
~F
i
s i g n i f y minutes / seconds / frame number i n
tens an single d i g i t s . )
[ E 6 S 1 1 ] PARTITION Number Setting
(Function) Command for the ORANGE BOOK PART I I
When w r i t i n g to PCA, t h i s command i s used to set the PARTITION
number. A f t e r comp1e t i ng t h e s e t t i n g , t h e e n c o d e r
c a l c u l a t e s the ATIME v a l u e of t h e f i r s t subcode f o r PCA
w r i t i n g s t a r t based on the p r e v i o u s l y s e t START TIME OF
LEAD-IN and the part i t ion number sett ing.
(Command format) E 6 S 1 1
! N i N
2
$ /
00
<
N i N
2
^ 99
(NiN
2
are numeric values between 0 ~ 9)
(Remarks) ® Previous to t h i s s e t t i n g , the START TIME OF LEAD-IN should
be set.
® When c a r r y i n g out FINALIZING of the d i s c , the PCA w r i t i n g
time should be
N i N
2
=
00.
[ E 6 S 1 2 ] PMA Data Setting (For INCREMENTAL WRITING)
(Function) Command for ORANGE BOOK PART I I
Used for s e t t i n g the necessary data f o r PMA w r i t i n g occuring
immediately a f t e r conclusion of INCREMENTAL WRITING.
(Command format)
(D
Send the following command to enter the PMA data sett ing mode.
E 6 S 1 2 !
(D
Then send 80 b i t s PMA data for one track by sending a t a time 4
b i t s , consisting of 0~9 ciphers, 20 times.
S N i " .
N 2 0 & /
S N i - - '
N 2 0 & /
® F i n a l l y , send the following command to f i n i s h the s e t t i n g .
S & /
1 6
