Kenton PRO SOLO mk3, Руководство по эксплуатации

Страница: 7 / 32

7
Loading & Storing Setups
One complete set of parameters (except for the ‘Other’ group ) on the PRO SOLO Mk3 is known
as a setup, and 32 of them can be stored and recalled.
For example, if you wish to use your PRO SOLO Mk3 with several different synthesizers, you
could have different setups for them, each with its own CV/Gate types and tuning settings. Of
course, as a setup contains an entire set of parameters, you could also use this to store and
recall anything, such as the ADSR settings.
Any value you change is automatically stored to the current setup when changing to Parameter
Mode. To save the setup for future use, select a program to write to using Parameter 99 (Store
Program). Press and hold the SELECT button for approximately 6 seconds until the display reads
[Sto]. The setup has now been saved and can be recalled later.
To load a setup, select Parameter 98 (Load Program) and choose which program to be loaded
as the current setup. Press and hold the SELECT button for approximately 6 seconds until the
display reads [Lod]. The setup has now been retrieved and is in use.
Tip:
You can change the current setup from MIDI Program Change commands by enabling
Parameter 97 (MIDI Program Change Receive Enable).