Kenton PRO SOLO mk3, Руководство по эксплуатации

Страница: 14 / 32

14
Parameter List – General & Note
P01 MIDI Receive Channel (default: 1)
Range: 1 to 16
Sets the MIDI receive channel.
P02 Re-trigger Time (default: 5 = 1ms)
Range: [off] and 1 to 25 (0.2ms to 5ms)
If set to off, successive simultaneous notes will not re-trigger the gate, also known as legato triggering. If set
to a number, a new note will briefly turn the gate off before turning it back on again. The number relates to
the off time in approximately 0.2ms increments.
P03 Note Priority (default: New)
[nn] New note priority
[lo] Low note priority (lowest note currently pressed)
[hi] High note priority (highest note currently pressed)
Sets the note priority for when multiple notes are pressed. The PRO SOLO Mk3 has a 5-note buffer memory
so trill effects can be achieved.
P04 Pitch Bend Range (default: 2)
Range: 0 to ±48 semitones.
Sets how much the CV output will be affected by Pitch Bend, in semitone steps.
P05 Portamento Controller (default: 65)
[on] Always on
[off] Always off
[Aut] Automatic (normally off, but legato playing turns it on)
0 to 119 CCs 0 to 119 (value of 0-63 for off and 64-127 for on)
Sets which CC number will turn portamento on or off; or sets to it fixed on, off or Automatic mode.
P06 Portamento Rate (default: 98)
Range: 1 to 127 (value does not correspond to any particular unit of time)
Sets how long it takes the CV output to glide from one note to another.
Note: to turn portamento off entirely, set P05 (above) to 0 .
P07 Portamento Type (default: Fixed Rate)
[Fr] Fixed rate
[Ft] Fixed time
Sets the portamento behaviour. In Fixed Rate, the CV will glide between notes at a constant speed, so
the time taken will vary depending on their interval. In Fixed Time, the portamento speed will
automatically change to ensure that the time taken to glide between notes is constant. (In extreme
cases this is not always possible)