2
PRO DCB
INTRODUCTION
C
ongratulations
on your purchase. The PRO DCB is much more than just a MIDI to DCB
converter, incorporating a built in LFO as well as filter and arpeggio clock control. Please
take some time out to read through all the manual to avoid any operational difficulties.
CONNECTIONS
MIDI In
Plug your MIDI keyboard or sequencer`s MIDI Out into here.
MIDI Out
Plug this into the MIDI In of your MIDI keyboard, when using the units DCB-MIDI capabilities
MIDI Thru
Plug this into the MIDI In of another piece of your MIDI equipment should it be necessary.
DCB
Plug this into your synth`s input marked DCB. This transmits and receives DCB information.
AUX
Plug this into your synth`s input marked VCF. This controls the filter cutoff via MIDI.
ARP CLOCK
Plug this into your synth`s input marked ARP CLOCK, this controls the speed of the arpeggio clock,
and syncs it to MIDI clock.
9-15V DC
Plug your power adaptor (not supplied) into here. The converter will take an adapter with a range
of 9-15V. We recommend the Kenton power supply which is made especially for the PRO-DCB but
any plug-top supply can be used as long as the output is regulated and is in this voltage range. Do
not use any adaptor which has an output voltage of higher than 15v. The PRO-DCB must not share
a power adaptor with any other device of any kind as this may damage your unit.
Juno/
Jupiter
MIDI Master
keyboard/computer
MIDI out
DCB,
and Filter
Arpeggio Clock
MIDI
In
To the MIDI In
of your other
MIDI keyboard
MIDI
Thru
9-15V external
power adapter
DCB out
DCB TO
MIDI
MIDI
out
