11
Turning the PRO DCB on whilst holding down all three push buttons will return the unit`s settings to
default values. `Fd` will momentarily be displayed when this has been done.
Power on the PRO DCB whilst holding the INC and DEC buttons pressed and the software revision
[43xx] and build number [0xxx] will be displayed. Releasing the buttons will revert to the normal
operational mode.
Power Input
9-15V DC (regulated supply required) (not supplied)
Power
100mA, 2.1mm plug (centre negative)
MIDI
In, Out, Thru
Digital Input/output
DCB (In and Out)
Analogue
outputs
Clock
(0-5v)
Aux
(0-12.5v)
Weight
600g
Dimensions
167 x 97 x 40 mm
Non-volatile memory EEPROM (no back-up battery required)
WARRANTY
The PRO DCB comes with a 12 month (from purchase date) back to base warranty, (i.e. customer
must arrange and pay for carriage to and from Kenton Electronics).
Brookfarm House,Station Road, South Wimbledon, London,SW19 2LP, UK
Tel: +44 (0)20 8544 9200 Fax: +44 (0)20 8544 9300
e-mail : [email protected] www : http://www.kenton.co.uk/
rev# 4300_730 e. & o. e.
4
TH
February 2002
RESETTING THE PRO DCB TO FACTORY DEFAULTS
DISPLAYING THE SOFTWARE VERSION
SPECIFICATIONS
