Kentek Entry-Guard, Руководство по эксплуатации

Страница: 4 / 29

SAFETY INTERLOCK ACCESS CONTROL SYSTEM
4
3
.
SYSTEM SPECIFICATIONS
Control Panel Dimensions: 6.00 D x 8.37 W x 10.50 L (inches)
Control Panel Weight:
3.25 lbs. (approx.)
Input Power: Transformer, Input: 100-240 VAC; Output: 15VDC, 2.4 Amp
OUTPUT FEATURES:
Laser Interlocks: (4) DPDT normally open / normally closed dry contacts,
12VDC can be added by applying jumpers JP10-JP13
Auxiliary Interlocks: (3) SPST normally open dry contacts
12VDC can be added by applying jumpers JP14-JP16
Resistive loads for Interlocks -
• Maximum switched power: 60 watts or 125VA
• Maximum switched current: 2 amps
• Maximum switched voltage: 220VDC or 250VAC
Exit Now: (1) DPDT normally open/normally closed dry contacts
12VDC can be added by applying jumper JP1
• Inductive or resistive loads, surge protected to 31VDC
Sign Operation Signals:
• Safe
• Danger/Safe
• Exit Now:
On = 12VDC (normally open contacts)
Off = 0VDC (normally open contacts)
Maximum current draw: 1A nominal at 12VDC
Magnetic Locks:
(2) DPDT normally open/normally closed dry contacts
12VDC can be added by applying jumpers JP2-JP3
• Inductive or resistive loads, surge protected to 31VDC
User DC Output:
(2) 12VDC
Note:
Maximum combined current draw for all external components powered by this device should not
exceed 1.5 amps.
Calculate the current draw from every external component that is receiving power from this device. For 12VDC
applications exceeding 1.5 amps use an external power source and connect through a set of dry contacts.