STORAGE CONDITIONS
CLEARANCES AND POSITIONING
CAUTION
IMPORTANT!
Incorrect positioning or installation of the unit may amplify
noise levels and vibrations generated during operation.
CAUTION
DANGER!
Movement of the unit should be performent with care,in order
to avoid damage to the external structure and to the internal
mechanical and electrical components.
Also make sure that there are no obstacles or people along
the route,to avoid the danger of collisions or crushing and to
prevent the lifting or handling device from turning over.
All the operations listed below must be carried out in
accordance with current health and safety regulations,both as
regards the equipment used and as regards the procedure
followed.Before commencing moving operations,check that
the lifting apparatus has the required capacity for the unit in
question.
The units may be moved or lifted either by hand or by means
of a suitable trolley.If the weight of the unit is more than 30
kg,moving units need to be moved at the same time,it is
advisable to put the machines in a container and lift them by
means of a crane or something similar.
Units in their packaging may be stacked not more than four
high,and must be kept under cover.
The units may be mounted vertically, provided that the
correct clearances for positioning are maintained.
Version
Version
6
I&O manual
Fig.3-2
Fig.3-4
≥20mm
≥a
≥a
≥a
≥a
≥
≥a
≥a
≥b
≥a
≥a