5
6
[1.] Once the Power Socket is inserted into the
Power Source, the Red, Green & Yellow LED
lights blink simultaneously for three times which
indicates that the devise is ready to use.
[2.] Cycle Mode Settings:
I.) High Cycle Mode
Press the Power Switch, then the Red LED Light
flashes to indicate that the device has been set in
the High Cycle Mode. In this mode, the fan & the
ozone
generator
start
their
operations
simultaneously. For the first 3 minutes, the ozone
generator produces ozone and the fan dissipates
it. In the 4th minute, the ozone generator stops
functioning but the fan continues dissipation. For
the next 6 minutes both the ozone and fan stop
their operations and go into a dormant stage. This
process maintains the PPM level in a room. The
cycle repeats itself till the Power On/ Off button is
pressed again.
II.) Medium Cycle Mode
For changing the High Cycle Mode into the
Medium Cycle Mode press the Cycle Mode
Button (on timer). After this the Green LED Light
indicates that the High Cycle Mode has been
changed to Medium Cycle Mode. In this mode,
the fan & the ozone generator start their
operations simultaneously. For the first 2
minutes, the ozone generator produces ozone
and the fan dissipates it. In the 3rd minute, the
ozone generator stops functioning but the fan
continues dissipation. For the next 7 minutes both
the ozone and the fan stop their operations and
go into a dormant stage. This process maintains
the PPM level in a room. The cycle repeats itself
till the Power On/ Off button is pressed again.
III.) Low Cycle Mode
For changing the Medium Cycle Mode into the
Low Cycle Mode press the Cycle mode button
twice. Then the Yellow LED light flashes to
indicate that the Low Cycle Mode has been
activated. In this mode, the fan & the Ozone
Generator start their operations simultaneously.
For 1 minute, the ozone generator produces
ozone and the fan dissipates it. In the 2nd minute,
the ozone generator stops functioning but the fan
continues dissipation. For the next 8 minutes both
the ozone and the fan stop their operations and
go into a dormant stage. This process maintains
the PPM level in a room. The cycle repeats itself
till the Power On/ Off button is pressed again.
IV.) The Cycle Mode settings can be changed
anytime after pressing the ON Timer button.
3.] Timing Mode Settings
I.) Timing Mode: High Cycle
Turn on the device by pressing the Power Switch.
Now press the Timing Mode Button (Off Timer)
once. The HI Mode Red LED Light and OZ LED
Light would blink continuously to indicate that the
device has been timed in the High Mode. The
device in this mode can continue operations for 6
hours.
II.) Timing Mode: Medium Cycle
Press the Timing Mode Button (off timer) twice.
Then the Medium Mode Green LED and the OZ
LED lights would blink continuously to indicate
that the device has been timed in the Medium
Mode. This Timer Mode runs the device
automatically for 3 hours.
III.) Timing Mode: Low Cycle
Press the Timing Mode button (Off Timer) thrice.
After this, the Low Mode Yellow LED and OZ LED
Lights would blink for indicating that the device
has timed in the Low Mode. This Timer Mode
runs the device automatically for 1 hour.
IV.) The Timing Mode settings can be changed
anytime by pressing the OFF Timer button.
* NOTES:
• The device registers the recently used settings
before turning off.
• When a user turns the device on, it uses the
most recently used settings – which can be
changed by the user as per the requirement.
Operational Instructions
KENT Ozone Air Purifier
(Wall-Mountable)
ON/OFF SWITCH
CONTINUOUS OPERATING SWITCH
TIMING CONTROL SWITCH
REMOTE CONTROL
POWER SOCKET
SIDE
OZONE OUTLET
POWER SWITCH
CONTINUOUS OPERATING SWITCH
TIMING CONTROL SWITCH
FUNCTION LIGHTS
FRONT
