3
Electrical Specifications
MODEL
Voltage
KENT Wall Mountable Air Purifier
DC 12V/ 1000mA
Rated Power Dissipation
9.6W
Ozone Output:
150 mg/h
Airflow
2.8 Km/h
Size
L 400 X W 100 X H 200mm
Weight
1210g
Condition Temperature
0
0
C ~ 40
0
C
Accessory
Adapter OUT/DC … 12V
4
Dr. J. A. Fontaine was the first person to use pure oxygen in 1879 for treating his patients.
The German Doctor, Albert Wolff made some more spectacular revelations in 1915 and
used ozone for treating the skin diseases. During World War I, ozone played a vital damage
control role in the German camp by healing wounds and anaerobic infections of the soldiers.
By 1950, ozone established a strong reputation for curing cancer and many other diseases
like tumour. Since 1990, many doctors have been using the ozone therapy in different ways
for curing patients.
Ozone – as Recommended by W.H.O?
A very popular research report of W.H.O (World Health Organisation) has revealed that it is
safe to use ozone concentration level up to 0.6 ppm. In such a controlled environment,
ozone harmlessly removes smell (of cigarette, decaying rodents, paint, urine, etc.),
unpleasant odours from the room and increases human metabolism.
AC - DC Adapter Specifications
Input
:
140 – 300 VAC
Frequency :
47 – 53Hz
Output
:
12V DC, 1000mA, 9.6 Watts
Caution
• Use only genuine & Kent certified adaptor for the device.
• If the adapter is damaged then purchase it from Kent or its authorised dealer.
Usage
• For removing the stale & foul smells from a room use the device for at least 30 minutes.
• Mount the device at a high place as Ozone is heavier than air.
• Please set the operating function before leaving the house everyday.
• Do not use the device in an airtight room for a long period.
***Items in the Box***
~ The Kent Wall Mountable Air Purifier
~ Manual
~ Warranty Card
~ Locating Sticker
~ One Set of Plastic Wall Insert
~ One Set of Screw
~ Adapter
~ Remote
~ One Set of Pencil Cell
~ Filter mesh
Installation Guidelines
1. Select an appropriate position for the device.
2. Place the hanging board locating sticker on the wall – where the device needs to be mounted.
3. Drill holes as per the space provided in sticker.
4. Now, insert the puff up (screw) bolt and screw the hanging board on wall.
5. Place the device on hanging board hangers and ensure that it is in a balanced position.
6. Now, the device is ready to use.
Note: If the wall is not straight or the screws are not properly drilled in an even position, the
device might shake and produce strange sounds. In such a situation, place a rubber pad
between the device and wall.
Note: Keep the device away from heat or direct sunlight.
Wall Hanging Diagram
1.
2.
3.
5.
4.
