KENT KWF295-6937, Инструкция по установке и эксплуатации

Страница: 12 / 16

CLEANING
The exterior surfaces of the wood fire should be cleaned when needed with a damp
cloth and non-abrasive cleaner. Use of caustic or abrasive cleaners will damage the
finish on the wood fire. If, due to continued burning at low temperature, the door glass is
dirty, use a paper towel moistened with water and dipped in the cold ashes from the fire
to lightly scrub the inside of the glass. Remember that a properly operated wood fire will
keep the glass clean by itself.
LUBRICATION
The door hinges, door handle spindle and air slide mechanism should be lubricated
periodically with a suitable high temperature grease. Do not use too much as this can
melt and drop down onto the hearth staining it.
RE-PAINTING
All Kent wood fires are finished in high temperature paint. If marks or scratches occur, it
can easily be touched up using Stove Bright paint in the correct colour. Paint is available
from your Kent retailer.
MAINTENANCE RECORDS
MAINTENANCE
Date Maintenance
12