2
TOOLS NEEDED
(All of the tools listed below may or may not be
necessary, depending upon whether the installation
is new or a replacement.)
MATERIALS NEEDED
(Dishwasher installation kits are available at your local
Sears store.)
Tools Needed/Materials Needed
Pipe Wrench
Phillips
Screwdriver
Torx
Screwdriver
Drill
Level
Adjustable Wrench
Hammer
Hole Saw
Tape
Measure
Slot
Screwdriver
Wire Stripper
Wire Cutter
Electrical Supply Cable
-
Minimum #14 AWG, 2 conduc-
tor, 1 ground, insulated copper
conductors.
Hot Water Supply Line -
Minimum 3/8” O.D. copper
tubing or metal braided dish-
washer supply line.
Shut-off valve and fittings
appropriate for hot water supply
line (copper tubing/compres-
sion fitting, or braided hose).
90° elbow with 3/8” N.P.T. male
threads on one leg, and sized
to fit your water supply line
(copper tubing/compression
fitting, or braided hose) on the
other leg.
Teflon tape or other pipe thread
compound to seal plumbing
connections.
UL listed conduit connector or
strain relief.
Содержание Dishwasher
