Kenmore Dishwasher, Руководство по установке

Страница: 10 / 32

10
Figure 17
SECURING THE DISHWASHER
Drive the mounting screws through the holes in the
mounting brackets, as shown in Figure 17, letter A for
Top Mount, or as shown in Figure 17, letter B for Side
mount.
DRAIN HOSE CONNECTION
The dishwasher drain hose may be connected to the
drain plumbing in one of four ways:
1) Directly to the under-sink dishwasher drain connec-
tion, as shown in Figure 18.
2) To the under-sink dishwasher drain
connection through an air gap, as shown in Figure 19.
3) Directly to a disposer dishwasher drain connection,
as shown in Figure 20.
4) To a disposer dishwasher drain connection through
an air gap, as shown in Figure 21.
Information on installing air gaps and disposers can be
found in the Plumbing Preparation section of this
manual.
NOTE: If the dishwasher drain hose is to be connected
to a disposer dishwasher drain connection, remove the
plug from the disposer’s dishwasher drain connection.
Use the supplied Rubber Connection Hose and Drain
Hose Clamps (letter E in the Materials Supplied
section of this manual) to connect the dishwasher
drain hose to the plumbing drain connection. Use the
spring clamp to secure the Rubber Connection Hose to
the dishwasher drain hose. Use the screw clamp to
secure the Rubber Connection Hose to the plumbing
drain connection.
NOTE: If the dishwasher drain hose is to be connected
either directly to an under-sink dishwasher drain
connection, as shown in Figure 18, or to a disposer
dishwasher drain connection, as shown in Figure 19,
form a curve in the dishwasher drain hose and secure
a portion of the curve at least 20” (508mm) above the
cabinet floor. If the dishwasher is installed in an
elevated enclosure, ensure that a portion of the drain
hose is at least 20” (508mm) above the cabinet floor.
Figure 20 Figure 21
Figure 18 Figure 19
Securing the Dishwasher/Drain Hose Connection
A
B