33
Oven Controls
Setting Flex Clean
To set Flex Clean to start immediately:
1.
Be sure the oven is empty and all oven racks are removed.
Remove all items from the cooktop. Be sure oven door is
completely
closed.
2. Press
Flex Clean
and the default 3-hour clean time will
appear in the display. After pressing Flex Clean, you may
accept the default 3-hour clean time by going to Step 3 or
choose a different clean time by using the numeric keypad.
The amount of clean time can be any length of time within
2 to 4 hours. For example, enter
2 0 0
for a 2-hour time or
enter
4 0 0
for a 4-hour self-clean time. You may choose a
2 hour 15 minute clean time by entering
2 1 5
(hours and
minutes).
3. Press
to activate Flex Clean.
When Flex Clean is pressed, a motor-driven lock mechanism will
lock the oven door automatically. door Loc will appear in the
display. (Allow 15 seconds for the lock mechanism to lock the
oven). Do not open the oven door when door Loc is displayed.
Once the oven door has locked, CLn will appear in the display
indicating Flex Clean has started.
Use caution when opening the oven door after
self-cleaning. The oven may still be very hot and can cause
burns. To avoid possible burns stand to the side of the oven when
opening the oven door to allow hot air or steam to escape.
When Flex Clean is finished
1.
Cln message will turn off, and Hot will appear in display
window.
2. Once the oven has cooled down (about 1 hour) and Hot is
no longer displayed, the door Opn message will appear.
When this message turns off, the oven door may be opened.
3. When the oven interior has completely cooled, wipe away
any residue or powdered ash with a damp cloth or paper
towel.
Important notes:
The kitchen area should be well ventilated using an open
window, ventilation fan or exhaust hood during the first self-
clean cycle to help eliminate the normal odors associated with
the first self-clean cycle.
When the Flex Clean finishes, the oven door will remain locked
until the range has cooled. In addition to the clean time that was
programmed, allow about one additional hour for the oven to
cool before you will be able to open the oven door. The Flex
Clean function will not operate whenever a radiant surface
element is ON or the oven lockout is active.
Setting Delay Start Flex Clean
Example — To start a delay Flex Clean with default clean time
of 3 hours and a start time of 9:00 o’clock:
1.
Be sure the clock is set with the correct time of day, the oven
is empty, and all oven racks are removed. Be sure oven door
is completely closed.
2. Press
Delay Start
3. Using numeric keypad enter
9 0 0
for time to start.
4. Press
to accept
5. Press
Flex Clean
.
6. Press .
If it becomes necessary to stop Flex Clean when active:
1.
Press .
2. If Flex Clean has heated the oven to a high temperature,
allow enough time for the oven to cool and the door Opn
message to appear. When this message turns OFF, the oven
may be opened.
3. Before restarting Flex Clean, be sure to read important
notes below.
Important notes:
•
When Flex Clean function is active you may check the
amount of clean time remaining by pressing the Flex Clean
key once.
•
If your clock is set with the (default) 12 hour display mode,
the Delay Start for a Flex Clean can only be programmed
to start up to 11 hours and 59 minutes after the time showing
in the display (be sure to set the clock to current time before
programming a delay start). To set a Delay Start Flex Clean
to begin 12 or more hours (maximum is 23 hours and 59
minutes) after the time of setting, be sure to first set the
control in the 24 hour display mode.
•
If Flex Clean was active and then interrupted by a power
failure or cancelled before the oven was thoroughly
cleaned, it may be necessary to run another self-clean
cycle.
•
If the oven temperature was high enough when Flex Clean
was interrupted the oven control may not allow another
self-clean cycle to be set for up to 4 hours.
Содержание 970C6701 Series
Страница 42: ...424712 10 20 08 SR Printed in the U S A 02488 ...
