Kenmore 796.3151#21 Series Скачать руководство пользователя

Страница: 24 / 34

BEFORE CALLING FOR SERVICE (continued)

Problem

Possible Causes

Solutions

Washer will not operate

Control panel has powered off due to

inactivity.
Washer is unplugged.

Water supply is turned off.
Controls are not set properly.

Lid is open

Circuit breaker/fuse is tripped/blown.

Control needs to be reset.

START/PAUSE was not pressed after a cycle

was set.

Extremely low water pressure.

Washer is too cold.

This is normal. Press the POWER button to turn

the washer on.
Make sure cord is plugged securely into a

working outlet.
Turn both hot and cold faucets fully on.
Make sure the cycle was set correctly, close the

lid and press the START/PAUSE button.
The washer will not operate if the lid is open.

Close the lid and make sure that nothing is

caught under the lid preventing it from closing

completely.
Check house circuit breakers/fuses. Replace

fuses or reset breaker. The washer should be

on a dedicated branch circuit. The washer will

resume the cycle where it stopped once power is

restored.
Press the POWER button, then re-select the

desired cycle and press the START/PAUSE

button.
Press the POWER button then re-select the

desired cycle and press the START/PAUSE

button. The washer will shut off if the START/

PAUSE button is not pressed within four minutes.
Check another faucet in the house to make sure

that household water pressure is adequate.
If the washer has been exposed to temperatures

below freezing for an extended period of time,

allow it to warm up before pressing the POWER

button. Otherwise, the display will not come on.

Washer not filling

properly

Filter clogged.

Inlet hoses may be kinked

Energy efficiency.

Insufficient water supply.

The washer lid is open.

Hot and cold inlet hoses are reversed.

Water level is too low.

Make sure the inlet filters on the fill valves

are not clogged. Refer to the filter cleaning

instructions.
Check that inlet hoses are not kinked or

clogged.
This is an energy-efficient washer. As a result,

the temperature settings for this washer may be

different than non-energy-efficient washers.
Make sure that both hot and cold water faucets

are turned on all the way.
The washer will not operate if the lid is open.

Close the lid and make sure that nothing is

caught under the lid preventing it from closing

completely.
Check inlet hose connections. Make sure the hot

water supply is connected to the hot inlet valve,

and the cold water supply is connected to the

cold inlet valve.
This is a high efficiency washer. The water will

not normally cover the clothes. The fill level is

optimized for the wash motion to achieve the

best wash performance.

TROUBLESHOOTING GUIDE

Содержание 796.3151#21 Series



































Результаты поиска

Содержание 796.3151#21 Series

Отзывы:

Похожие инструкции для 796.3151#21 Series

Бренды по названию

Популярные бренды

Kenmore 796.3151#21 Series, Инструкция по использованию и уходу

Результаты поиска

Содержание 796.3151#21 Series

Отзывы:

Похожие инструкции для 796.3151#21 Series

Бренды по названию

Популярные бренды