Kenmore 795.78733.804 Скачать руководство пользователя

Страница: 34 / 82

- 34 -

6-9 Hidden Dispenser operation

6-9-1 Open/Close

1. When the power is connected to the refrigerator for the first time, the Dispenser will close once.

2. When you press the Open/Close, Water and Ice Button while the Dispenser is closed, the Dispenser will be opened.

3. When you open the refrigerator Door while the Dispenser is open, the Dispenser will be closed.

4. When the Dispenser and the refrigerator Door is open, the Dispenser will not open.

5. When the Dispenser is open and no additional signal 25 seconds after receiving the operating signal of the Button Tray, the

Dispenser will automatically be closed.

6-9-2 Water

1. When you press the Water Button while the Dispenser is closed, the Dispenser will be opened.

2. When the Dispenser is open and when you press the Button Tray while the LED of Water Button is on, water will be dispensed

in the Dispenser.

3. When the Dispenser is open and when you press the Water Button while the LED of Ice Button is on, the LED of the Water

Button will be turned on.

6-9-3 Ice

1. When you press the Ice Button while the Dispenser is closed, the Dispenser will be open.

2. When the Dispenser is open and when you press the Button Tray while the LED of Ice Button is on, ice will be

dispensed in the Dispenser.

3. When the Dispenser is open and when you press the Ice Button while the LED of the Water Button is on, the LED of the Ice

Button will be turned on.

6-9-4 Lock

1. When you press the Lock Button for 3 seconds while the Dispenser is closed, the LED of the Lock Button will be turned on and

the LED of other button will be turned off to stop operation.

2. While the Dispenser is open, the Lock Button will not be activated even when you press the button.

6-9-5 Button LED

1. When the LED of Open/Close, Water or Ice Button is turned on during normal conditions and the Lock Button activated, only the

LED of the Lock Button will be turned on.

2. When there is no additional signal 20 seconds after receiving the operating signal of the Display Button and Button Tray, LED of

the Display Button will all be turned off (Sleeping Mode)

Troubleshooting for Ice & Water Dispenser

CAUTION

1. If the alarm sounds and the back lights (4 buttons) flash, open and close the

cover display to reset.

2. If the alarm does not reset by opening and closing the cover display, unplug

the refrigerator to reset.

Содержание 795.78733.804



















































































Результаты поиска

Содержание 795.78733.804

Отзывы:

Похожие инструкции для 795.78733.804

Бренды по названию

Популярные бренды

Kenmore 795.78733.804, Руководство по обслуживанию

Результаты поиска

Содержание 795.78733.804

Отзывы:

Похожие инструкции для 795.78733.804

Бренды по названию

Популярные бренды