12
SETTING CLOCK AT POWER UP
You will be prompted to enter the time of day in the event
of a power failure or when you first provide electric power
to your appliance.
• When your appliance is first powered up, 12:00 will flash
in the display.
• Enter the time of day using the numeric key pads and
press
START
to set.
If an invalid time of day is entered, the clock automatically
goes to 12.00. Press
Clock
, then re-enter a valid time of
day and press
START
.
Select the
Clock
key to modify the time of day during
other situations such as day light savings.
TIMER SET/OFF
• Suppose you want to time a 3-minute long distance phone
call.
1. Press
Timer Set/Off
pad.
2. Enter time by pressing
3 0 0
on the numeric pads.
3:00
3. Press
START
pad. The timer will count down.
To cancel the timer, touch
Timer Set/Off
pad once.
PREHEAT TEMPERATURE DISPLAY
Once a cooking feature has been started in one of the
ovens, the control will display the actual oven temperature
while preheating. Once the oven reaches the oven set
temperature only the oven set temperature will display.
The preheat temperature display is available with the Conv
Bake mode.
OVEN LOCK OUT
The Oven Lock Out prevents unwanted oven operation such
as by small children. The oven can be set so that the control
panel is deactivated or locked.
To lock, press and hold
STOP
for 3 seconds.
LOCKED
To unlock, press and hold
STOP
for 3 seconds.
ACCENT LIGHT
Your appliance includes a decorative Accent light centered
horizontally across the touch-sensitive control panel. The
Accent light comes with a theatre style intensity feature that
slowly increases brightness at turn on and slowly fades when
turning off.
When the Accent light is off, the light is in automatic mode.
This means the Accent light will turn on automatically when
an oven or Timer has been activated. The Accent light will
turn off automatically when these functions are no longer
active.
When the Accent light is OFF, it may be manually turned
ON by pressing the Accent Light keypad once. When the
Accent light has been manually turned on, it will remain
on until manually turned off by pressing the Accent Light
keypad again. The brightness of the Accent light may also
be adjusted.
See example below to adjust Accent light brightness:
1. Press and hold the
Accent Light
keypad until an
acceptance tone sounds (about 6 seconds).
2. Using the numeric keypads, enter any digit from
0
to
100
to change the brightness level. Entering 0 will effectively
turn the Accent light OFF until the brightness level is
adjusted to a higher level.
3. Press
START
to save the desired brightness setting.
Getting Started
Содержание 790.48883 SERIES
Страница 27: ...27 ...
