Kenmore 790.4500series, Инструкция по использованию и уходу

Страница: 15 / 48

15
ENGLISH
Setting Oven Controls
Figure 1
Figure 2
Figure 3
Figure 4
Figure 6
Figure 7
TIMED
DOOR
DELAY
LOCKED
TIMER
CLEAN
CONV
ROAST
BAKE
WARM
BROIL
PROBE
TIMED
DOOR
DELAY
LOCKED
TIMER
CLEAN
CONV
ROAST
BAKE
WARM
BROIL
PROBE
TIMED
DOOR
DELAY
LOCKED
TIMER
CLEAN
CONV
ROAST
BAKE
WARM
BROIL
PROBE
INSTRUCTIONS PRESS DISPLAY
Setting the Clock
The pad is used to set the clock. The clock may be set for 12 or 24 hour time of day
operation. The clock has been preset at the factory for the 12 hour operation. When the
range is first plugged in, or when the power supply to the range has been interrupted, the
timer in the display will flash (See Fig. 1).
To set the clock (example below for 1:30)
1. Press . « CLO » will appear in the display (Figure 2).
2. Press
1
3 0
pads to set the time of day to 1:30
(Figure 3). «
CLO
» will stay in the display. Press
START
. «
CLO
»
will disappear and the clock will start (Figure 4).
Changing between 12 or 24 hour time of day display
1. Press and hold for 7 seconds. « CLO » will appear in the
display. After 3 seconds will appear in the display indicating
that the cooktop lockout is active (Figure 5). CONTINUE holding
the pad until «
12h » (Figure 6) or « 24h » (Figure 7) appears in
the display and the control beeps once.
2. Press
Flex
Clean to switch between the 12 and 24 hour time of day
display. The display will show either « 12h » (Figure 6) or « 24h »
(Figure 7).
3. Press
START
to accept the change or press
STOP
to reject the
change. will disappear from the display.
4. Reset the correct time as described in To set the Clock above.
Please note that if the 24 hour time of day mode was chosen,
the clock will now display time from 0:00 through 23:59 hours.
1
3 0
START
for 7 seconds
Flex
Clean
START
or
STOP
TIMED
DOOR
DELAY
LOCKED
TIMER
CLEAN
CONV
ROAST
BAKE
WARM
BROIL
PROBE
Figure 5
TIMED
DOOR
DELAY
LOCKED
TIMER
CLEAN
CONV
ROAST
BAKE
WARM
BROIL
PROBE