english
31
TIMED
DOOR
DELAY
LOCKED
TIMER
CLEAN
CONV
ROAST
BAKE
WARM
BROIL
PROBE
TIMED
DOOR
DELAY
LOCKED
TIMER
CLEAN
CONV
ROAST
BAKE
WARM
BROIL
PROBE
TIMED
DOOR
DELAY
LOCKED
TIMER
CLEAN
CONV
ROAST
BAKE
WARM
BROIL
PROBE
TIMED
DOOR
DELAY
LOCKED
TIMER
CLEAN
CONV
ROAST
BAKE
WARM
BROIL
PROBE
TIMED
DOOR
DELAY
LOCKED
TIMER
CLEAN
CONV
ROAST
BAKE
WARM
BROIL
PROBE
TIMED
DOOR
DELAY
LOCKED
TIMER
CLEAN
CONV
ROAST
BAKE
WARM
BROIL
PROBE
To adjust the oven temperature higher
1. Press
for 6 seconds (Figure 1).
2. To increase the temperature use the number pads to enter
the desired change (Example 30°F)
(Figure 2). The
temperature may be increased as much as 35°F (19°C).
3. Press
to accept the temperature change and the display
will return to the time of day (Figure 3). Press
to reject the
change if necessary.
To adjust the oven temperature lower
1. Press
for 6 seconds. 0° will appear in the display (Figure
4).
2. To decrease the temperature use the number pads to enter the
desired change (Example -30°F)
and then press
(Figure 5). The temperature may be decreased as much as 35°F
(19°C).
3. Press
to accept the temperature change and the display
will return to the time of day (Figure 6). Press
to reject the
change if necessary.
insTRUCTiOns
PRess
DisPlAY
Adjusting Oven Temperature
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6
note: The oven
temperature adjustments
made with this feature will
not change the Self-Clean
cycle temperature or the
Broil temperature.
The temperature in the oven has been pre-set at the factory. When first using the oven,
be sure to follow recipe times and temperatures. If you think the oven is cooking too hot
or too cool for the temperature you select, you can adjust the actual oven temperature
to be more or less than what is displayed. Before adjusting, test a recipe by using a
temperature setting that is higher or lower than the recommended temperature. The
baking results should help you to decide how much of an adjustment is needed.
or
or
note: The oven temperature adjustments are permanent and will
stay forever in the unit memory unless you manually change it again.
Even a power outage will not reset these changes. Follow the same
procedure again if you wish to change it to a different setting.
Содержание 790.3690 Series
Страница 38: ...38 Notes ...
Страница 78: ...38 Notas ...