10
Adjusting Flipper Mullion Screw
To adjust the flipper mullion:
1. Loosen the screw located on the flipper mullion hinge.
2. Adjust flipper mullion height. For proper connection with
the flipper mullion guide, there should be a separation
about the thickness of a coin (0.060 inches, or 1.5 mm)
between the guide and flipper mullion.
3. Retighten screw.
3. Lift the door while adjusting the washer. To raise the door,
rotate washer clockwise (when viewed from the bottom).
To lower door, rotate washer counterclockwise (when
viewed from the bottom).
Adjusting Flipper Mullion Height
Raising/Lowering Door
Installation (Continued)