background image

28

FULL ONE YEAR WARRANTY ON WATER HEATER

For one year from the date of purchase, when your Sears Kenmore water heater is installed and operated in accordance with the
instructions in this manual, Sears will:

1. Repair defects in material or workmanship in this water heater, free of charge.
2. Furnish and install a new current model water heater of equal capacity and quality, free of charge, if a leak occurs in the tank.

LIMITED WARRANTY ON TANKS THAT LEAK

After one year and through 3 years from date of purchase, if a leak occurs in the tank, Sears will furnish a new current model
water heater of equal capacity and quality. You will be charged for any installation.

To obtain warranty service, SIMPLY CALL 1-800-4-MY-HOME

®

 (1-800-469-4663). This warranty applies only while this product

is in use in the United States.

This warranty gives you specific legal rights and you may also have other rights which vary from state to state.

Sears, Roebuck and Co., Dept. 817 WA, Hoffman Estates, IL 60179

The model number of your water heater is found on the model rating plate on the front of the water heater.

Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A

The price of your water heater does not include a free checkup service call

. On water heater installations arranged by Sears, Sears

warrants the installation.

A charge will be made on service calls due to poor or incomplete installation. These include:

a. Adjusting thermostat

c. Leaks in pipes or fittings

e. Condensation

b. Lighting pilot

d. Improper venting

MASTER PROTECTION AGREEMENTS

Congratulations

 on making a smart purchase. Your new Kenmore

®

product is designed and manufactured for years of dependable
operation. But like all products, it may require preventive maintenance
or repair from time to time. That’s when having a Master Protection
Agreement can save you money and aggravation.

Purchase a Master Protection Agreement now and protect yourself
from unexpected hassle and expense.

The Master Protection Agreement also helps extend the life of your
new product. Here’s what’s included in the Agreement:

Expert Service

 by our 12,000 professional repair specialist.

Unlimited service and no charge

 for parts and labor on all covered

repairs.

“No-lemon” guarantee

 - replacement of your covered product if

four or more product failures occur within twelve months.

Product replacement

 if your covered product can’t be fixed.

Annual Preventive Maintenance Check

 at your request - no

extra charge.

Fast help by phone

 - phone support from a Sears technician on

products requiring in-home repair, plus convenient repair scheduling.

Power surge protection

 against electrical damage due to power

fluctuations.

Rental reimbursement

 if repair of your covered product takes

longer than promised.

Once you purchase the Agreement, a simple phone call is all that it
takes for you to schedule service. You can call anytime day or night,
or schedule a service appointment on-line.

Sears has over 12,000 professional repair specialists, who have
access to over 4.5 million quality parts and accessories. That’s the
kind of professionalism you can count on to help prolong the life of
your new purchase for years to come. Purchase your Master Protection
Agreement today!

Some limitations and exclusions apply. For prices and additional
information call 1-800-827-6655.

SEARS INSTALLATION SERVICE

For Sears professional Installation

 of home appliances, garage door

openers, water heaters, and other major home items, in the U.S.A.,
call 

1-800-4-MY-HOME

®

.

For in-home major brand repair service

Call 24 hours a day, 7 days a week (U.S.A. and Canada)

1-800-4-MY-HOME

®

(1-800-469-4663)

www.sears.com

Содержание 153.338003





























Отзывы: