Kenmore 153.321160 Скачать руководство пользователя страница 4

4

10 - YEAR LIMITED WARRANTY ON WATER HEATER

For ten years from the date of purchase, if this water heater is installed and operated in a single-family home in accordance with the 

owner’s manual instructions and all local applicable plumbing codes, Sears will:

1. 

Supply free water heater parts for those that are defective in material or workmanship.

2. 

Supply a free water heater for one that develops a leak.

For the second through tenth year from the purchase date, you must pay the labor cost for installation of parts or water heater.

For commercial, institutional, industrial or residential use by two or more families, the above limited warranty is only for two years. During 

the second year you must pay the labor cost for parts or water heater installation.

If governmental regulations prohibit Sears from furnishing a comparable model replacement water heater under this warranty, Sears will 

furnish a new water heater of comparable output as permitted by such governmental regulations; however, the Owner will be charged 

for the additional cost associated with the changes made to the replacement water heater design to comply with such governmental 

regulations.

Replacements and/or repairs furnished under this warranty do not carry a new warranty, and are only covered by the unexpired portion 

of the original warranty.

1 - YEAR EXCLUSIVE KENMORE LABOR WARRANTY

For the 

fi

 rst year from the date of purchase, Sears will, free of charge, supply and install new water heater parts for defective ones or a 

new water heater for one that develops a leak.

WARRANTY SERVICE

To obtain warranty service, call 1-800-4-MY-HOME

®

 (1-800-469-4663).

This warranty applies only while this product is in use in the United States.

This warranty gives you speci

fi

 c legal rights, and you may also have other rights which vary from state to state. 

The price of your water heater does not include a free checkup service call

. On water heater installations arranged by Sears, Sears 

warrants the installation.

A charge will be made on service calls due to poor or incomplete installation. These include:

 

a. Adjusting thermostat 

b. Condensation 

c. Leaks in pipes or 

fi

 ttings

 

Master Protection Agreements

Congratulations on making a smart purchase. 

Your new Kenmore

®

 

product is designed and manufactured for years of dependable op-
eration.  But like all products, it may require preventive maintenance 
or  repair from time to time. That’s when having a Master Protection 
Agreement can save you money and aggravation. 
The Master Protection Agreement also helps extend the life of your  
new product. Here’s what the Agreement* includes: 

• 

Parts and labor

 needed to help keep products operating 

properly  

under normal use

, not just defects. Our coverage 

goes 

well  beyond the product warranty

. No deductibles, no 

functional failure excluded from coverage— 

real protection

• 

Expert service

 by a force of more than 

10,000 authorized  

Sears service technicians

, which means someone you can  

trust will be working on your product. 

• 

Unlimited service calls and nationwide service

, as often as  

you want us, whenever you want us.  

• 

“No-lemon”

 guarantee – replacement of your covered product 

if four or more product failures occur within twelve months.  

• 

Product replacement

 if your covered product can’t be fixed.

• 

Annual Preventive Maintenance Check

 at your request – no 

extra charge. 

• 

Fast help by phone

 – we call it 

Rapid Resolution

 – phone 

support  from a Sears representative on all products. Think of 
us as a  “talking owner’s manual.” 

• 

Power surge protection

 against electrical damage due to 

power  fluctuations. 

• 

$250 Food Loss Protection

 annually for any food spoilage that  

is the result of mechanical failure of any covered refrigerator 
or  freezer. 

• 

Rental reimbursement

 if repair of your covered product takes  

longer than promised.  

• 

10% discount

 off the regular price of any non-covered repair 

service and related installed parts. 

Once you purchase the Agreement, a simple phone call is all that it  
takes for you to schedule service. You can call anytime day or night,  
or schedule a service appointment online. 
The Master Protection Agreement is a risk free purchase. If you cancel 
for any reason during the product warranty period, we will provide a 
full refund. Or, a prorated refund anytime after the product warranty 
period expires. Purchase your Master Protection Agreement today! 

Some limitations and exclusions apply. For prices and additional  
information in the U.S.A. call 1-800-827-6655. 
* Coverage in Canada varies on some items. For full details, call 
Sears Canada at 1-800-361-6665.  

Sears Installation Service

 

For Sears professional installation

 of home appliances, garage door  

openers, water heaters, and other major home items, in the U.S.A. 
or Canada call 

1-800-4-MY-HOME

®

.

 

SEARS BRANDS MANAGEMENT CORPORATION, Hoffman Estates, IL 60179

PRODUCT WARRANTY

Содержание 153.321160





























Отзывы: