Kendrion 7760016A00-0004, Руководство пользователя

Страница: 22 / 33

Operating Instructions BA 77 600..A00 // Last updated: 13/03/2020 // Page 22 of 33
4.3 Spare parts and accessories
Designation, order number
Size
Hand release (21) Fixing screw (22) Friction disc (5) 4)
A A S
10
76 14110B00940 304028 73 24110E00400
11
76 14111B00940 304030 73 24111E00400
13
76 14113B00940 304035 73 24113E00400
16
76 14116B00940 304060 73 24116E00400
19
76 14119B00940 304061 76 14119E00400
24
76 14124B00940 304088 76 14124E00400
Table 22/1: Spare parts (S) and accessories (A)
5. Condition at delivery
Upon receipt of the shipment, the spring-applied brake must be checked for transit damage before storage.
Ordered accessories (e.g. hand release, fixing screws) are delivered together with the brake. The spring-
applied single-disc brake is delivered ready for mounting with factory-adjusted M
2
rated torque and factory-
adjusted air gap 's' (adjustment with sleeves and tooth ring).
Note!
If the brake is not installed immediately upon delivery, it must be stored in a dry, dust-free and vibration-proof
place.
Note!
The environmental conditions specified in Table 22/1 and in EN IEC 60721-3-2 / EN IEC 60721-3-1 must be
considered during transport and storage of the brake, especially when long-term storage is envisaged. The
permissible ambient conditions only apply if the component is stored in the original packaging.
Environmental conditions
Conditions for storage
to EN IEC 60721-3-1
Conditions for transport
to EN IEC 60721-3-2
Mechanical environmental conditions 1M11 2M4
Climatic environmental conditions 1K21 and 1Z2 2K12
Biological environmental conditions 1B1 2B1
Mechanically active substances 1S11 2S5
Chemically active substances 1C1 2C1
Table 22/1: Environmental conditions for storage and transport as specified in EN IEC 60721-3-1 and
EN IEC 60721-3-2
6. Emissions
6.1 Noise
The spring-applied single-disc brake produces switching noise during engagement and release. The noise
level is determined by the installation conditions, circuitry (e.g. with overexcitation) and air gap. Depending on
the installation position, operating conditions and quality of the friction surfaces, clearly audible vibrations
(squeaking) may be produced during braking.
4)
Friction discs can be supplied with special friction material for increased switching work (W).