Kende CD-220, Руководство пользователя

Страница: 8 / 14

8
Ⅴ
SAFETY REGULATIONS
For the safety of persons and properties, the following safety regulations
must be observed when the charger is used.
1
、
As the flammable gas can be generated in the course of charging. the battery
should be charged inside the room with good ventilation. Flames and sparks should
be kept away and smoking is prohibited.
2
、
For the protection class is IP20. the product shall not be used outside the room,
where it is the rainy and snowy.
3
、
The grounding wire must be connected to the socket so that the pin for
grounding inside the plug can be reliably earthed.
4
、
In the course of charging, the charger should be put at a level place and should
not be tilted or reversely placed.
5
、
As the casing can generate heat during charging. it is prohibited to cover the
vent of casing.
6
、
The instructions for the battery and transportation tools should be strictly followed
in the course of charging.
7
、
The battery should be mounted or dismantled after the power is turned off.
8
、
The maintenance for the charger should be done by the professionals.
9
、
The fuse and cable with the same specifications should be used when they need
to be replaced.
10
、
The power socket should be connected with the grounding wire so that the pin of
power cord can be reliably earthed.
11
、
The battery clamps should not be contacted with each other.
12
、
The cover of battery should be opened in the course of charging.
13
、
It is prohibited to connect the battery clamps reversely. (e.g., wrongly connect
the red clamp of anode to the cathode of battery, or wrongly connect the black
clamp of cathode to the anode of battery)
14
、
It is prohibited to use the charger for the charging of non-charging batteries.
15
、
The fuse with the same specifications as the original configuration should be used
when they need to be replaced. Do not use other conductors to replace the fuse.
16
、
In case the power cable is damaged. the damaged cable should be dismantled and
replaced by professionals for maintenance.
17
、
If the supply cord is damaged, it must be replaced by the manufacturer. its service
agent or similarly qualified person in order to avoid a hazard.
18
、
The battery terminal not connected to the chassis has to be connected first. The other
connection is to be made to the chassis, remote from the battery and fuel line. The
battery charger is then to be connected to the supply mains.
19
、
After charging, disconnected the battery charger form the supply mains. Then
remove the connection the charger and the battery.
20
、
The product construction was same as the previous approved types in 15013894,
the only difference is that plugs not used, and the product is intended to be
permanently connected to fixed wiring. -a statement in the instructions that a
disconnection incorporated in the fixed wiring is to be provided.