Kende CD-220, Руководство пользователя

Страница: 10 / 14

10
connection or connected in series must match the output voltage of the charger.
Normally, it is recommended to charge the batteries when they are connected in
series so as to ensure the current passing each battery has the same value.
●
Connecting the batteries: Connect the (red) anode of battery clamp to the anode
of the battery and the corresponding terminal (12V or 24V) of the charger. Connect
the (black) cathode of battery clamp to the cathode of the battery. If the battery of the
car needs to be charged, first you should connect the charger to the terminal which is
not connected with the chassis, then connect the other terminal of charger to the chassis.
The connecting points must be far away from the battery and fuel tubes.
●
Insert the power plug. First turn the power switch to
“I”
position, then turn the
function switch “charge/start” to “charge” position. The ammeter will indicate the
reading for the current (fit for CD-220,CD-320,CD-420). CD-520 and CD-620 has the
options for charging time. For details, please refer to Section
Ⅻ
--Diagram for Current
Regulating.
●
In the course of charging, the temperature of electrolytic solution in the battery
should not be more than 45℃. If the charging is not finished and the temperature
reaches 45℃, the charging current should be lowered down so as to prolong the charging
time and make the temperature of electrolytic solution not increase continuously
until the charging is completed.
●
The following phenomena may occur after charging is finished: Specific gravity
of battery solution is close to 1.28KG/L; Terminal voltage of battery is increased
to more than 14V (or 28V); Electrolytic solution is heavily bubbled up.
●
After the charging is finished, the power should be turned off first, and then the
battery clamp should be removed from the battery.
3
、
Auxiliary start
Note: Auxiliary start must be carried out by strictly following the
operation procedures specified for the product.
●
First use the charger to fast charge the battery for 10-15 minutes.