Kendal HB-MF01, Инструкция по эксплуатации

Страница: 18 / 20

※
Accessories
Spot handle×1 pair
Mushroom handle×1 pair
Handles without Cap×1 pair
※
Operating Instruction
1. Connect one pair handles to BIO outlet.
There are 3 pairs different handles available:Mushroom handles:
For large area such as the cheeks, forehead, neck, etc. Spot handles: For
small area, such as nasal fossa, and so on.Handles without Cap: Please
insert the Cotton stick (which you can find them in the plastic bag), then
dampen the cotton with anti-wrinkle essence or other kind of essences.
Note : Handles with damp cotton stick conducts electricity stronger than
the other 2 kinds of handles.
2. Select the time as you like about 15 minutes or 30 minutes.
3. Select the strong or weak intensity. Adjust the BIO intensity slowly
from minimum to maximum, for commonly use, do not set the
intensity to maximum unless necessary.
9 intensity levels -- 1 to 9: it is for intensity of BIO, from weak to
strong. Please choose the suitable intensity according to clients'
requirments or tolerance capability.
4. Select the mode just you like such as for bust, neck or face.
Usage for mode1, 2 and 3:
1: pulse wave 50HZ -- use for skin around eye.
2: pulse wave 70HZ -- use for face.
3: pulse wave 100HZ -- use for body.
5. BIO function has to be operated with beauty products, such as Gel,
whiten products, slimming products and so on to conduct
micro-current. You can also apply some beauty essence on the skin
before you choose BIO function. You can feel very little if you operate BIO
without applying beauty care cream products in advance.
Usually your face is very sensitive. If you want to feel it, apply some
cream to your face, select a mode and an intensity level, and you can feel
the micro-current working obviously. Even your eye can feel light changes
due to the pulse of micro-current.
High-Frequency Function
※
Function
Promote blood circulation, strengthen activity of lymph, supply
nutrition to scarfskin, strengthen cell metabolism, sterilize and
diminish inflammation, promote the wound to heal up.
※
Accessories
High Frequency Handle
×
1 Glass
Spoon Electrode
×
1 Glass
Mushroom Electrode
×
1 Glass
angled Spot Electrode
×
1 (3 glass
electrodes, different electrode for
different area)
※
Operating Instruction
When lightly touched to the surface of the skin or scalp, a mild high
frequency electrical current passes through the neon or argon
gas-filled glass electrode which then produces charged particles. This
in turn causes the glass electrode to emit a calming energy in the form
of an orange or violet 'glow'. When applied to the skin, the subject will
experience a mild zapping or buzzing sensation.
1. Simply insert the desired glass electrode (metal end first) into the hole
at the end of the handle.
2. Connect the handle's wire to the machine (it only fits one way)
making sure to fasten it into place the securing ring.
3. Using the high frequency intensity knob/ power switch, turn it to the
“on” position and the glass electrode should light up.
4. Turning the intensity knob slowly from minimum to maximum to
adjust the current to match the desired need, do not set the intensity
to maximum unless necessary.
5. When the machine is not in use, make sure the power switch is in the
“Off” position.
Caution:
1- Please first turn off the high frequency power before exchange into
another shape glass electrode.
2- Do not drop or immerse the handle into water as this can cause the
machine to short, damaging the machine/handle and causing
possible serious injury to the person(s) in contact with the machine.
32 33