Kendal HB-MF01, Инструкция по эксплуатации

Страница: 7 / 20

For Function & Operation Details please refer to:
Contents/ Function & Treatment/
①②③
1- Finish all accessories connection before plug the
power cord.
Don't plug the accessory power wires to the sockets when the
machine powers are on.
Though there are two ultrasonic sockets, only one ultrasonic
probe is allowed to plug in and be used at one time.
DON'T plug both the flat and pointed probes into the two sockets at
one time, or the intensity will be very weak.
2- Be sure the Main Power Button on the machine right side
and the panel button
“POWER” (Power On/Off) are on
→
Set the
“TIMER”
●
Diamond: Press ON (Diamond ON/OFF) to start
→ Adjust the Intensity Knob for the suction you want
→ Press OFF (Diamond ON/OFF) after use.
●
Ultrasonic: Press "Wrinkle" and adjust the INTENSITY
→ Press >/ ■
to start, choose "Pulse/Continuous Wave"
→ Press >/ ■
to stop after use.
●
Cold & Hot: Turn on the panel power "HOT & COLD"
→ Press the power button on the hot & cold hammer
→ Turn off both power buttons after use.
3- After Operating, turn off the power buttons and disconnect the
power cord, then disconnect and clean accessories.
Package Included
Diamond Dermabrasion Machine X 1
PVC vacuum hose 6*4 X 1
Stainless steel wands X 2
Diamond tips X 9
Cotton filter X 2 packages (1big, 1 small)
Ultrasonic probe X 2 (flat and pointed)
Cold/Hot Hammer X 1
Power Cord X 1
HB-MF05
HB-MF05
10 11