IAG Performance | 1203 Baltimore Blvd. Westminster, MD 21157 | Ph: 410-840-3555 | www.iagperformance.com
1
IAG Performance Replacement Blow Off Valve Elbow for the 2002-07 WRX & 04-13 STi
Part# IAG-ENG-5012BK / SL
Tools Required: #1 Phillips Head Screw Driver
Contents
:
Billet Elbow (x1)
Rubber O-ring (x1)
Stainless Steel Screws (x2)
Thank you for choosing IAG Performance. The IAG Billet
elbow is a direct replacement for the factory elbow on the
stock aluminum blow off valve (BOV). This installation
guides starts after you have removed the BOV from the
vehicle. Given the many different intercooler and chassis
set-ups that it can be configured with, we will not be
covering the steps to remove the BOV from the engine.
Once you have removed the BOV from your engine, please
follow the instructions below for an easy installation.
1. Using a #1 screwdriver, remove both of the screws
securing the elbow to the housing. Set the old elbow, o-
ring and screws aside.
1.