7
10. INSTALLATING THE
MOUNTING PLATE
Step 1. Remove 1 of 3 screws from the
mounting ring and loosen the other 2 screws.
(Do not remove)
Step 2. Place the key holes on the mounting
plate over the 2 screws previously loosened
from the mounting ring, turn mounting plate
until it locks in place at the narrow section of
the key holes. Secure by tightening the 2
screws previously loosened and the one
screw previously removed. (Fig. 16)
Figure 15
9. ATTACHING THE FAN
BLADES
Figure 13
Figure 14
Screws
Screws
Mounting
plate
Mounting
ring
CAUTION:
Make sure all screws are
tightened securely.
Step 1. Attach the fan blades to the blade holders
by using three screws and fiber washers as
shown in Figure 13. Start a screw into the blade
holder, do not tighten. Repeat for the 2 remaining
screws and washers.
Step 2. Tighten each screw securely starting with
the center screw. Make sure the blade is straight.
Step3. Attach the blade assembly to the fan
motor assembly by tightening the two screws
previously the package hardware. (Figure 14)
Fan motor assemby
Blade assembly
Screws
Fiber washers
Blade
Blade holder
