www. kenall.com P: 800-4-Kenall F: 847-360-1781 1020 Lakeside Drive Gurnee, Illinois 60031
8
INSTALLATION INSTRUCTIONS
CSMRI_F-3732_050813
Content of specification sheets is subject to change; please consult www.kenall.com for current product details. © 2013 Kenall Mfg. Co. All rights reserved.
www. kenall.com
P: 800-4-Kenall F: 847-360-1781 1020 Lakeside Drive Gurnee, Illinois 60031
CUSTOMER ACKNOWLEDGEMENT
Customer acknowledges that these Installation Instructions are part of the product specification, and that the
attached Installation Registration Form will be provided to the installer to sign and return to Kenall after
installation is complete. This signed release is required by Kenall before order will be released into production.
Signature: _________________________________ Date: _________________________________
Print Name: _______________________________ Company Name:__________________________
• Disconnect power to all circuits before wiring system.
• Install in accordance with all national, state, and local codes.
• Do not connect to an ungrounded supply.
• Wiring connections must be made internal to the enclosure.
• Failure to install unit on a mechanically-sound surface may result in personal injury, physical damage, or potential
fire hazard.
• Use installation procedures appropriate for an environment involving MRI and sensitive electronic equipment.
• Read all markings and labels to ensure correct installation of the power supply. Supplemental instructions may be
located on the enclosure, in addition to this instruction sheet, regarding orientation, or mounting restrictions.
• Read instructions provided with the MedMaster
™
MRIPS-312 external power supply for proper installation and
electrical connection to the lighting system.
IMPORTANT SAFEGUARDS
To prevent
MRI machine interference, all DC power and dimming signal wiring must be completely shielded within
grounded aluminum conduit and a suitable
MRI
room
EMI
filter must be installed on each line.
When using electrical equipment, basic safety precautions should always be followed, including the following:
THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH THE
CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
SAVE THESE INSTRUCTIONS