kenall CSMRI Series Скачать руководство пользователя страница 7

 www. kenall.com      P: 800-4-Kenall      F: 847-360-1781      1020 Lakeside Drive Gurnee, Illinois 60031    

7

INSTALLATION INSTRUCTIONS

CSMRI_F-3732_050813

Kenall reserves the right to issue credit, repair, or replace the defective merchandise, at its discretion, upon 

notification and confirmation by its local representative of the defect. Kenall also reserves the right to test and 

examine the defective product if the defect is questionable and to deny the warranty herein for any product 

altered, improperly installed, installed in applications for which it is not intended.  This includes operation in 

ambient temperatures above stated limits for any length of time.  Failure by electrical surge shall not be covered 

under warranty.

Kenall assumes no responsibility for labor or freight costs incurred in connection with the installation, removal, or 

replacement of products determined to be defective or any other consequential or incidental damages arising from 

the use of the product. Kenall’s entire liability on any claim of loss or damage resulting from a defective product is 

limited to the replacement price of the product.

For technical assistance, call 1-800-4KENALL (1-800-453-6255).

WARRANTY

CUSTOMER SERVICE

Содержание CSMRI Series










Отзывы: