PROMIG 200ML/0509 – 10
© KEMPPI OY
1
0
Main switch
When the switch is in position1 the unit is ready for welding. In
position 0 the machine gets no voltage and power source or wire
feed motor cannot not be started. In MIG/MAG welding the wire
drive switch is working.
Welding process selection switch
MMA welding with stepless welding current control
MIG two-sequence procedure (normal function)
MIG four-sequence procedure (hold switch)
MIG-process selection switch
Pulsed MIG
Synergic MIG (1-MIG)
Normal MIG
Control mode selection switch
Local control
Remote control
Wire feed speed and current control
MIG/MAG welding: local control of wire feed speed
MMA welding: welding current control.
ML-function panel
