K4100714000001-00 / 05.2017
2
INFO
Installation and operation
Read the manual and follow the instructions before
installation! Installation and maintenance must be
carried out by qualified plumbers.
Provide manual to the plant operator and keep on
hand for further reference!
Make sure that the installation location is a
closed interior, dry and frost-proof.
Liability
No warranty nor liability in case of:
- Non-compliance with the manual.
- Incorrect installation and/or operating.
- Unauthorised modification of the product.
- Any other errors in operating.
Use
The KEMPER Module S safety group, DN 20, to
DIN EN 1488, is used to safeguard self-contained
drinking water heaters against excess pressure.
The safety group is suitable for safeguarding
self-contained drinking water heaters with
ratings up to150 kW and capacities > 200 and <
1000 litres in accordance with DIN 1988, Part 2
and DIN 4753.
Compactly designed, the safety group comprises
all the valve components required by DIN 1988
for the inlet side of drinking water heaters.
Important warning:
Warning!
Highlights risks that may result in
injury,
material
damage
or
contamination of drinking water.
Note!
Highlights risks that may result in
damage
to
the
plant
or
dysfunction.
Standards | Directives
DIN EN 1488
DIN 4753-1
DIN 1988-2
Disposal
Local
regulations
on
waste
recycling and disposal must be
followed. The product must not be
disposed of with household waste
but must rather be disposed of
appropriately.
1x
2
