Connect the cable permanently to the sensor!
1. Cut the cap top
2. Effect the cable
4. Put the cap up
3. Screw the cable
on the sensor
Comply with the following max cable lengths when connecting with a BMS to avoid negative influences
on the measurement precision:
Sensor solely for flow measurements (only Figure 138 4G)
•
max. 300 m cable without amplifier
•
Cable: 3 x 0.34 mm² symmetric star quad twisted and shielded
•
BMS / DDC evaluation: Frequency input card 5VDC
Cable: 3 x 0,34mm² symmetric star quad twisted and shieldedt
Also attach shield to GND
20 /24 – K41001384G001-00 / 12.2021–
©
www.kemper-olpe.de
© www.kemper-olpe.de
– 12.2021 / K41001384G001-00 – 21 /24
