KEMKRAFT
ENGINEERING, INC.
MODEL KEI-200A SPC DIGITAL INCLINOMETER
96-014.doc
Page 5 of 8
47650 CLIPPER DR. PLYMOUTH TWP., MI. 48170 (734) 414-6500
CALIBRATION PROCEDURE:
•
Charge unit over night before calibrating.
•
Install mechanical steering wheel fixture (with inclinometer permanently mounted onto it)
onto a calibration stand that can be adjusted for 0 degrees and some other known value
such as 5 or 10 degrees.
•
Set the cal. stand to 0 degrees and adjust the ZERO control on the front panel of the
inclinometer for 00.0 degrees.
•
Set the cal. stand to eg. 10 degrees and adjust the GAIN control on the front panel of the
inclinometer for 10.0 degrees.
Repeat the following two procedures until the values are stable.
WARRANTY AND SERVICE INSTRUCTIONS
KEMKRAFT Engineering, Inc. warranties this equipment against defects in workmanship and
materials for a period of 90 days from date of signature of release. We will, at our option,
repair or replace products which prove defective during the warranty period. No other
warranty, expressed or implied, is given. KEI is not liable for consequential damages. Damage
caused to the equipment as a result of improper use or abuse, or unauthorized modification of
the instrument is not covered under this warranty.
For service contact:
KEMKRAFT Engineering, Inc.
47650
Clipper
Dr.
Plymouth Twp., MI. 48170
PH: (734) 414-6500
FAX: (734) 414-6599
