K°Bloc – Fully welded plate heat exchangers - English Version 2.2 - 01.2016
46
Carry out the following steps:
1.
Ensure that the transportation lifting lug on the K°Bloc is in a vertical
position.
2.
Fit the following:
one shackle at the transport lifting eye for the vertical K°Bloc of the
"single eye" version;
one shackle at the upper transport lifting eye for the vertical K°Bloc of
the "double eye" version.
!
Take care that when the K°Bloc is lifted at a later stage the tensile forces
act on the transportation lifting lugs as shown in the following illustration.
If transportation lifting lug are used in the horizontal position, there is a
danger of the transportation lifting lug buckling. Therefore, always en-
sure before lifting that the transportation lifting lug is in the vertical posi-
tion.
3.
Fit two shackles to the two upper openings at the foot.
