16
Epos 300 User Manual www.kelvinlight.com
7.1 Intensity
The light intensity can be controlled via Bluetooth using the Kelvin Narrator App for iOS/Android, wired DMX,
Lumen Radio/Wireless DMX (built-in) or from the separate control unit. The left knob on the controller is dedicated
to light intensity throughout, while the intensity touch slider is available on operating screens such as CCT, HSI,
Gel, XY and Effects.
The output light intensity can be controlled in two different modes:
stable
and
maximum
.
Stable
intensity caps the
max light output to be equally bright across all color mixing possibilities for the specific mode being used.
Maximum
intensity removes the light output cap and allows max brightness for the exact color mix.
Knob control:
1. Twist the knob to increase or decrease the light intensity.
2. Short press the knob to dim the light between 0% and the current light intensity. Adjusting the intensity after
the light has been dimmed will reset the current light intensity.
3. Long press the knob to toggle between stable and maximum light output.
Touch control:
1. Slider adjusts the output light intensity.
2. Stability button (next to the intensity indicator) toggles between stable and maximum light output.
7.2 Mode CCT
CCT mode is used for setting the white light output using color temperature and tint (green-magenta). The Epos
300 allows the user to choose between two CCT ranges, regular range (2800-10000K) and extended range (2000-
20000K).
Knob control:
-
Turn the middle knob to adjust the color temperature.
-
Turn the right knob to adjust the tint.
-
Press the right knob to reset the tint to neutral (0.0).
Touch control:
-
Sliders adjust the color temperature and tint.
-
Range button (above CCT slider) toggles between regular and extended color temperature range.
-
Preset buttons (below the CCT slider) sets the color temperature to preset temperature points, candle
