Kelvin Duo, Инструкция по эксплуатации

Страница: 6 / 16

3
Best practice
Ensure the clip is always firmly registered against the
exterior of the glass bottle, do not place the clip against
a label.
Ensure the clip is always below the level of the wine
inside the bottle.
When placing or removing the bottle from the
refrigerator there maybe a sudden difference in
the temperature reading. This is due to the ambient
temperature change on all surfaces including the
internal components of the transmitter clip.
This may take up to 10-15 minutes to normalize after
which a predictable steady temperature change will be
observed.
When chilling the wine we suggest allowing the
temperature to drop below the ideal target zone until the
backlight turns ‘blue’ and displays the word ‘Under’.
Remove the wine from the refrigerator, this will then
provide the longest possible drinking time as the
temperature starts to rise again and the backlight turns “green’ and displays
the word ‘Ideal”. When the backlight turns ‘red’ and displays the word ‘Over’
place the wine back in the refrigerator to repeat the process.
Precautions
Do not fully submerge the transmitter clip in water, although a rubber plug
is provided for sockets, this is splash resistant only and not fully waterproof.
Do not submerge the receiver base in water.
Do not expose the clip or receiver parts to extreme sunlight or humidity
Remove batteries from the receiver base if the product is not going to be
used for long periods of time.
Do not dismantle the receiver base or clip components; the unit does not
contain user serviceable components.