Kelvin Duo, Инструкция по эксплуатации

Страница: 7 / 16

4
Battery installation
It is necessary to fit 3x AAA batteries
(not supplied) into the receiver base.
Turn the receiver base over to reveal
the base plate of the product.
Using a suitable screwdriver carefully
remove the 4 securing screws from
the base plate putting them to one side.
Take care not to loose these screws.
Carefully remove the base plate from
the product to expose the battery
compartment.
Observe the correct polarity of the 3
battery positions, carefully insert the
batteries pushing the ‘-‘ end of the battery
in at an angle against the spring first, then
push the battery downwards to connect the
‘+’ end to the contact accordingly.
Repeat this process for the other 2
batteries.
Carefully replace the base plate ensuring
the 4 screw holes and power switch hole
are aligned correctly.
Replace the 4 screws and tighten,
do not over tighten.