Kelvin Duo, Инструкция по эксплуатации

Страница: 14 / 16

11
Contact details
For more information about the Kelvin range please visit our web site:
www.mykelvin.co.uk
Kelvin Duo is a product manufactured by: Target Holdings (UK) Limited
Unit 11 High March, Daventry, Northamptonshire, NN11 4HB, United Kingdom
www.targetholdings.co.uk
Patent pending
Kelvin is a trademark of Target Holdings (UK) Limited
E & O E
Troubleshooting
Problem Likely cause
LCD characters on
the receiver base are
faint
Batteries are low in receive base, change for new
cells . See page 4 for details on how to change.
LCD display reads
‘00’
Receiver base has lost transmission signal from the
transmitter clip. Ensure battery is fully charged in
the clip. Ensure the receiver base is within workable
distance from the transmitter clip (10m). Check if
other high powered radio frequency devices are in
close proximity which may affect the performance
of this product. Whilst the clip and receiver are on,
press the power button on the clip momentarily to
re transmit data to check the connection.
Transmission
distance between
bottle clip and
receiver seems poor
Ensure battery is fully charged in the clip. Check if
other high powered radio frequency devices are in
close proximity.
LCD display reads
‘00’ and clip does
not seem to work
with the reciever
To reset pairing between clip and base, ensure
clip is on but turn receiver base off. Press and
hold down “-” and “+” keys together. Then turn on
power of receiver base whilst still holding down
the keys. Then release the “-” and “+” keys, after
a short while the LED will show the word ‘DEAL’
this confirms the clip has been successfully paired
with the base. Turn the power off on the receiver
base, and then turn it on again to resume normal
operation.