7
CONNECTING
•
Read the tractor’s manual before arming.
•
The equipment is connected to the tractor front loaders, secured with locking pins.
•
Connect the hydraulic hoses to the tractor’s third function.
•
When disconnecting the equipment set in the ground.
•
Make sure there is no pressure in the system before disconnecting the hydraulic hoses.
•
Disconnect the equipment from the front loader.
Warning!
Never use faulty safety equipments!
AFTER USE
Parking is not allowed with load above ground but is done with the equipment resting on the
ground.Flush the equipment with water if necessary.
TRANSPORT AND STORING
Make sure the area is clear of people, children and objects prior to transportation. Always be
extra careful during transport and movement. Ensure that the equipment or product is well
anchored and that existing transport safety devices are installed. Always place the load as low
as possible. Respect the risk zone even in the transport and movement. When lifting, never
stand under a suspended load. Carts used to transport should have functioning brakes.
Always keep the equipment or product in a dry place, preferably under cover when not in use.
Make sure that the equipment or product is stable and not likely to tip over. Never let children
play at the storage site. Keep in mind the risk of tipping!
MAINTENANCE AND SERVICE
Visually inspect / check the equipment and its equipment regularly. The tractor engine must
be switched off and the equipment is lowered to the ground position before service begins.
Make sure the equipment is stable and not likely to tip over during maintenance and service.
Replace damaged and worn parts immediately to reduce the risk of injury. Lubricate all mov-
ing parts and grease fittings and check hoses regularly. The hydraulic system is not adapted
to the environmental friendly oil. Use only spare parts with equivalent performance to reduce
the risk of damage and failure. All repairs and connections with electricity must be performed
by an authorized person. Check all bolts and nuts are tightened after use, maintenance and /
or service. Always test the machine before work is started.
RECYCLING
Disposal of the product, disassemble and transport to the municipality’s recycling station.
Contact your local authority for further information.
