6
STEPS BEFORE USE
Read the instruction manual carefully. Be sure that you understand the safety information,
instruction manual and warning labels. Use common sense during operratin and use the ap-
propriate personal protective equipmentAlways check the performance and the machine
combination that are used. It’s highly important these matches in a satisfactory manner. This
is to ensure the product or the function and most important yours and others safety. Do visual
inspection of equipment or product before use.
Lubricate moving parts and check that all screw-nuts and bolts are tightened.Learn and re-
member the correct working methods. Beginners should always keep a low speed, use ex-
treme caution before routine and product knowledge is achieved. The user/customer is re-
sponsible to handle the situation correctly. The product should not be taken into use unless it
can be done in a safe way for the user.
Warning!
For safety, this product should only be used in
the manner described in this manual. The user is
responsible for the instruction to be read through
and followed.
OPERATING THE MACHINE
Only people who understand the safety information and instructions in this manual may op-
erate the equipment. Be alert and careful when working with the machine and only use the
equipment or product in the manner described in this manual. Avoid the use of the equip-
ment at lower temperatures than -20C and higher temperatures than +30C.
When working with equipment that has moving parts, there is always the risk of injury. Be
careful when working with equipment equipped with hydraulic hoses ,oil under pressure can
penetrate the skin. Seek medical attention immediately if this occurs.
Due to a hydraulic system is never 100% tight, a hydraulic system control should be performed
before the equipment is operated. Leakage can occur due to internal leakage in the tractor’s
valve, internal leakage in the equipment’s hydraulic cylinder etc. Check the extent of the leak
by running the equipment’s cylinder in end position and keep up the pressure for 1 min. If the
cylinder begins to “wander” to the other direction there is a leakage in the gasket. Gasket or
cylinder must be replaced.
Always work alone with the equipments that are defined as single porpose equipments.
Never overload the trailer. Respect the equipment’s danger zone.