*1 pc CREE XH-G high brightness LED
*AA alkaline battery
*Water resistant (IPX 4)
*5 modes: Standard / High / Over drive / Flashing / Strobe
*Quick release handlebar mount (fits 22-31.8mm)
*High precision optical lens
*Side visibility
1. Press the power button to choose the modes:
In this method three modes are cycled.
2. Fast press two times the power button to change into the strobe
and flashing modes.Fast press two times back to the first cycle.
5. Press and hold the on / off button around 0.5 seconds to turn off.
HEADLIGHT OPERATION
HOW TO MOUNT THE HEADLIGHT
HOW TO MOUNT THE HEADLIGHT TO HELMET
1.Wrap belt around helmet and return the belt onto slotted space.
2.Twist screw knob clockwise until tight.
3.Slide headlight forward onto bracket until it clicks into place.
4.Press down release lever to remove.
To adjust the vertical beam angle when mounted on the helmet,
loosen the screw knob and rotate the light up or down to your
preferred angle, then tighten the screw knob to secure the light in
place.
INSTALL
click
RELEASE
PRESS
PRESS
PRESS
USER GUIDELINE
Thank you for choosing MOON headlight!
*For using this product safely and conveniently and keeping it
well-preserved, please read this manual carefully before using.
Please save this manual for future reference.
*Due to the improvement of the product, the product you bought may
not be exactly in accordance with the introduction of this manual. We
apologize for that.
SPECIFICATION
CONTENTS INCLUDED
BEAM ADJUSTMENT
To adjust the horizontal beam, spin the headlight left to right for your
best side to side beam angle. To adjust the vertical beam angle,
loosen the mounting and rotate the light up and down to your best
vertical beam angle, then tighten the mounting.
The beam is widely dispersed, besides its high brightness. To prevent
from blinding the oncoming vehicles on the public roads, you’d better
adjust the angle downward.
!
RELEASE
LEVER
BELT
SCREW
KNOB
Power button
Over drive
High beam
Standard
Over drive
High beam
Standard
Strobe
Flashing
Power button
Fast press
2 times
Hold 0.5 sec
1.Install the bracket onto handlebar by wrapping rubber strap around
post/bar and stretching strap around hook to secure.
2.Slide headlight forward onto bracket until it clicks into place.
3.Press down release lever to remove.
INSTALL
RELEASE
RELEASE
LEVER
RUBBER
STRAP
click
PRESS
PRESS
Power button
®
Fast press
2 times
Mode
Lumen
Runtime
Standard
High
20
Up to 7 hour 25mins
Up to 3 hours 10 mins
40
Over drive
Up to 1 hours 50 mins
80
Up to 7 hours 55 mins
40
Strobe
Up to 7 hours 35 mins
40
Flashing
Weight
54 .8 g
20 lux
0.2 M
0.4 M
Side light
1M
2M
10M
840
210
2 M
Emax (LUX)
Distance (M)
8 M
NONA 80
80
LUMENS
11°
SPOT ANGLE
44°
TOTAL ANGLE
Contents:
NOVA 80
*AA alkaline battery
*RB-07 (Handlebar bracket)
Optional accessories:
*RB-06 (Helmet mount bracket)
