12
Operating instructions CellaTemp PK / PKF / PKL xx
Pin 1
BN (brown)
L+ (Power supply 24V)
Pin 5
GY (grey)
Test Input
Pin 2 WH (white)
Analogue output; 0/4 ��� 20mA
Pin 4
BK (black)
Open Collector switching output; I
max
= 150 mA
or IO-Link
Pin 3
BU (blue)
L- (Shield)
The pyrometer must be protected against high voltage and strong electro-
magnetic fields� Use a shielded cable, connecting it via connector casing
to the device housing�
Use a flyback diode when switching inductive loads�
If the diagnostics function is not used, connect the diagnostics input (Pin 5) to
minus� As an alternative, use a 4-pole cable box where Pin 5 is not assigned�
7 Shielding and Grounding
7.1 Equipotential bonding
The pyrometer housing is connected to the shielding via the cable connector!
Differences in ground potentials might cause an equalising current to flow between
devices through a cable shielded at both ends� In this case, be sure to install an
additional equipotential bonding line�
Содержание CellaTemp PKF Series
Страница 1: ...PYROMETER CellaTemp PK PKF PKL xx Ident no 1117973 05 2022 MANUAL...
Страница 15: ...15 EN Operating instructions CellaTemp PK PKF PKL xx 9 2 Digital output OUT1 9 3 Analogue output OUT2...
Страница 16: ...16 Operating instructions CellaTemp PK PKF PKL xx 9 4 Advanced Features...
Страница 73: ......