![background image](http://html1.mh-extra.com/html/keithley/kpci-pio96/kpci-pio96_user-manual_3962490015.webp)
2-2
General Description
KPCI-PIO96 User’s Manual
Specifications
General specifications are listed in Appendix A. I/O connections are identified in Section 3, and
I/O addresses are defined in Section 4.
System requirements
The system capabilities required to run the KPCI-PIO96 board, and to use the DriverLINX
software supplied with the board, are listed in Table 2-1.
Table 2-1
System requirements
* Any CD ROM drive that came installed with the required computer should be satisfactory.
However, if you have post-installed an older CD ROM drive or arrived at your present system by
updating the microprocessor or replacing the motherboard, be aware that some early CD ROM
drives do not support the long file names often used in 32 bit Windows files.
Functional description
The KPCI-PIO96 is a 96-bit parallel digital interface board designed for the PCI bus. The KPCI-
PIO96 works in a Windows 95/98/NT environment and takes advantage of the 32 bit width and
the Plug and Play feature of the PCI bus. The KPCI-PIO96 meets a wide variety of parallel I/O
requirements, including communicating with peripherals, operating relays, and reading switch
inputs. All I/O lines are TTL compatible.
Standard digital I/O emulation
The 96 I/O lines emulate the I/O lines of four Intel 8255 Programmable Peripheral Interface (PPI)
chips configured for control register mode 0, as follows:
•
For each emulated 8255 chip there is a PA port, a PB port and a PC port.
•
Each PA and PB port is byte-wide (8-bits) and can be set independently under software con-
trol as inputs or outputs.
•
Each PC port is byte-wide but can be divided into two separate 4-bit ports: PC lower and PC
upper, each of which can be set up as either inputs or outputs.
CPU Type
Pentium or higher processor on motherboard with PCI bus version 2.1
Operating system
Windows® 95 or higher
Windows® NT version 4.0 or higher
Memory
16 MB or greater RAM when running Windows® 95 or 98
32 MB or greater RAM when running Windows® NT
Hard disk space
4 MB for minimum installation
50 MB for maximum installation
Other
A CD ROM drive*
A free PCI bus expansion slot
Enough reserve computer power supply capacity to power the KPCI-
PIO96 board, which draws 25 W at 5 VDC
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Содержание KPCI-PIO96
