![background image](http://html1.mh-extra.com/html/keithley/kpci-pio96/kpci-pio96_user-manual_3962490025.webp)
KPCI-PIO96 User’s Manual
Installation
3-9
Installing the board
CAUTION
Ensure that the computer is turned OFF before installing or
removing a board. Installing or removing a board while power is
ON can damage your computer, the board, or both.
Handle the board at the mounting bracket, using a grounded
wrist strap. Do not touch the circuit traces or connector contacts.
If you do not have a grounded wrist strap, periodically discharge
static electricity by placing one hand firmly on a grounded metal
portion of the computer chassis.
NOTE
Install the DriverLINX software before installing the KPCI-PIO96
card. Otherwise, the device drivers will be more difficult to install.
Use the following steps to install a KPCI-PIO96 board in a PCI expansion slot on your computer:
1. Turn power OFF to the computer, and to all external circuits if any are attached to the board.
2. Remove the computer chassis cover.
3. Select an unoccupied PCI expansion slot in the rear panel, and remove the corresponding
dummy mounting plate.
4. Carefully route the I/O cables over the face of the board and out through the cutout in the
mounting bracket.
5. Insert and secure the board in the selected PCI expansion slot.
Connecting I/O cables to your external circuit
CAUTION
Ensure that both the computer and the external circuit are turned
OFF before making any connections. Making connections while
the computer and external circuits are powered can damage the
computer, the board, and the external circuit.
External circuits must properly match the input and output requirements of the card. For example,
input signals often require pull-up resistors and elimination of contact bounce; output signals
must not draw excessive current. The following section presents pull-up, de-bounce and relay
drive circuits and discusses using +5 VDC power from the board for these and other applications.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Содержание KPCI-PIO96
