manualshive.com logo in svg

Keithley DAS-1800HR Series, Руководство пользователя

"Keithley DAS-1800HR Series" - это универсальная система сбора данных с высоким разрешением, обеспечивающая точное измерение различных параметров. Для получения подробной информации и руководства по использованию, вы можете бесплатно скачать пользовательское руководство на нашем сайте.

Поделиться
Скачать
background image

 

The following safety precautions should be observed before using this product and any associated instrumentation.
Although some instruments and accessories would normally be used with non-hazardous voltages, there are situations
where hazardous conditions may be present.

This product is intended for use by qualified personnel who recognize shock hazards and are familiar with the safety
precautions required to avoid possible injury. Read and follow all installation, operation, and maintenance information
carefully before using the product. Refer to the manual for complete product specifications.

If the product is used in a manner not specified, the protection provided by the product may be impaired.

The types of product users are:

 

Responsible body

 

 is the individual or group responsible for the use and maintenance of equipment, for ensuring that

the equipment is operated within its specifications and operating limits, and for ensuring that operators are adequately
trained.

 

Operators

 

 use the product for its intended function. They must be trained in electrical safety procedures and proper use

of the instrument. They must be protected from electric shock and contact with hazardous live circuits.

 

Maintenance personnel

 

 perform routine procedures on the product to keep it operating properly, for example, setting

the line voltage or replacing consumable materials. Maintenance procedures are described in the manual. The proce-
dures explicitly state if the operator may perform them. Otherwise, they should be performed only by service personnel.

 

Service personnel

 

 are trained to work on live circuits, and perform safe installations and repairs of products. Only

properly trained service personnel may perform installation and service procedures.

Keithley products are designed for use with electrical signals that are rated Installation Category I and Installation
Category II, as described in the International Electrotechnical Commission (IEC) Standard IEC 60664. Most mea-
surement, control, and data I/O signals are Installation Category I and must not be directly connected to mains voltage
or to voltage sources with high transient over-voltages. Installation Category II connections require protection for high
transient over-voltages often associated with local AC mains connections. Assume all measurement, control, and data
I/O connections are for connection to Category I sources unless otherwise marked or described in the Manual.

Exercise extreme caution when a shock hazard is present. Lethal voltage may be present on cable connector jacks or
test fixtures. The American National Standards Institute (ANSI) states that a shock hazard exists when voltage levels
greater than 30V RMS, 42.4V peak, or 60VDC are present. 

 

A good safety practice is to expect that hazardous volt-

age is present in any unknown circuit before measuring.

 

Operators of this product must be protected from electric shock at all times. The responsible body must ensure that
operators are prevented access and/or insulated from every connection point. In some cases, connections must be ex-
posed to potential human contact. Product operators in these circumstances must be trained to protect themselves from
the risk of electric shock. If the circuit is capable of operating at or above 1000 volts, 

 

no conductive part of the circuit

may be exposed.

 

Do not connect switching cards directly to unlimited power circuits. They are intended to be used with impedance
limited sources. NEVER connect switching cards directly to AC mains. When connecting sources to switching cards,
install protective devices to limit fault current and voltage to the card.

Before operating an instrument, make sure the line cord is connected to a properly grounded power receptacle. Inspect
the connecting cables, test leads, and jumpers for possible wear, cracks, or breaks before each use.

 

        S

 

afety Precautions

 

5/02

Artisan Scientific - Quality Instrumentation ... Guaranteed  |  (888) 88-SOURCE  |  www.artisan-scientific.com

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Содержание DAS-1800HR Series












































































































































Отзывы:

Нет отзывов

Похожие инструкции для DAS-1800HR Series

D-Link DFE-690TXD Quick Install Manual preview
DFE-690TXD
Бренд: D-Link Страницы: 12
Jetter JetWeb JX2-PR0FI1 Operator'S Manual preview
JetWeb JX2-PR0FI1
Бренд: Jetter Страницы: 67
Supermicro SuperServer 5019S-L User Manual preview
SuperServer 5019S-L
Бренд: Supermicro Страницы: 61
Time domain PulsON 440 Datasheet And User Manual preview
PulsON 440
Бренд: Time domain Страницы: 64
Lanner electronics EM-566 Series Manual preview
EM-566 Series
Бренд: Lanner electronics Страницы: 59
Gearlinx NR4400 Series User'S Quick Start Manual preview
NR4400 Series
Бренд: Gearlinx Страницы: 23
Xantech IR-X10 Installation Instructions Manual preview
IR-X10
Бренд: Xantech Страницы: 16
Alesis QuadraVerb 2 Setting Up preview
QuadraVerb 2
Бренд: Alesis Страницы: 11
NXP Semiconductors MSC8113 Reference Manual preview
MSC8113
Бренд: NXP Semiconductors Страницы: 1202
Mitsubishi M16C/20 Series Software Manual preview
M16C/20 Series
Бренд: Mitsubishi Страницы: 188
Azoteq IQ Switch ProxSense RS100 Application Notes preview
IQ Switch ProxSense RS100
Бренд: Azoteq Страницы: 9
Jabra A330 Multiuse Technical Specifications preview
A330 Multiuse
Бренд: Jabra Страницы: 2
Vivotek ND9312 User Manual preview
ND9312
Бренд: Vivotek Страницы: 185
V7 SCREENSHARE PRO User Manual preview
SCREENSHARE PRO
Бренд: V7 Страницы: 4
ADLINK Technology cPCI-3520 Series User Manual preview
cPCI-3520 Series
Бренд: ADLINK Technology Страницы: 81
Panduit CDPP8RG-S Installation Instructions preview
CDPP8RG-S
Бренд: Panduit Страницы: 5
IEI Technology HYPER-BT-E38 1 Series User Manual preview
HYPER-BT-E38 1 Series
Бренд: IEI Technology Страницы: 95
Ecos SECURE BOOT STICK FX Administrator'S Manual preview
SECURE BOOT STICK FX
Бренд: Ecos Страницы: 22

Бренды по названию

Популярные бренды

Загрузить еще бренды