terminated at both ends with 3-slot triaxial connectors. Used to connect the
Model 8009 test fixture to the Model 6517 Electrometer.
•
8007-GND-3:
Safety ground wire with ground lug.
1.3
Safety information
Safety symbols and terms
The following terms and symbols are found on the test equipment, or used in this
packing list.
The
symbol on an instrument denotes the user should refer to the
appropriate operating instructions.
The
symbol on an instrument denotes that 1000V or more may be present on
the terminal(s). Use standard safety precautions to avoid personal contact with
these voltages.
The
WARNING
heading indicates hazards that may cause personal injury or
death. Always read over the information very carefully before performing the
procedure.
The
CAUTION
heading explains hazards that could damage the instrument.
Such damage may invalidate the warranty.
The ground screw
must be connected to a safety earth ground as explained
in Section 2.
Safety precautions
WARNING
To avoid possible personal injury or death caused by elec-
tric shock, the following safety precautions must be
observed when using the Model 8009 Resistivity Test Fix-
ture.
1. Resistivity tests typically use lethal voltage levels. Safe operation requires
the proper use of the lid interlock.
2. Before use, connect the test fixture screw terminal to a safety earth ground
er)
r
sur-
urce to
!
2
3
Содержание 8009
