Keithley 8009, Инструкция по эксплуатации

Страница: 6 / 36

Chassis connections must only be used as shield connections for measuring cir-
cuits, NOT as safety earth ground connections.
If you are using a test fixture, keep the lid closed while power is applied to the
device under test. Safe operation requires the use of a lid interlock.
If a screw is present on the test fixture, connect it to safety earth ground using
#18 AWG or larger wire.
The symbol on an instrument or accessory indicates that 1000V or more may
be present on the terminals. Refer to the product manual for detailed operating in-
formation.
Instrumentation and accessories should not be connected to humans.
Maintenance should be performed by qualified service personnel. Before per-
forming any maintenance, disconnect the line cord and all test cables.
The following safety precautions should
and any associated
would normally
hazardous conditions
This product
ar
Read the
Exercise extreme caution when a shock haza
present on cable connector
dards Institute (ANSI) states that a shock ha
er than 30V RMS, 42.4V peak, or 60VDC
to exp
measuring.
Before
ly grounded p
jum
For maximum safety, do not to
ments while power is app
from the
disconnecting cabl
ing i
Do not touch any
the circuit under test or pow
with dry hands while standing
the voltage
Do not exc
defined in the
strumen
Do not connect switching cards directly
tended to be used with
ca
prot
When fuses are used in a prod
prot